[Laminated Dock Bumpers] ~ [Extruded Rubber Bumpers] ~  [Molded Bumpers]
[Trailer & Crane Bumpers] ~ [Specialty Molded Bumpers]
[Industrial Rubber Wedges] ~ [Bumper Stops]

WB01372_.gif (406 bytes) Laminated Dock Bumpers

Laminated style dock bumpers provide durable, economical protection for your loading dock and trailers. Units are constructed of fabric reinforced rubber from recycled truck tires. Pads are laminated between painted structural angles and held together with 3⁄4" steel tie rods. Installation is quick and easy by bolting or welding units to dock. Width is bolt hole center to bolt hole center. Bolt holes are 13/16" in diameter. Installation hardware available separately, see below. Recommended installation with laminated pads in vertical position as shown.

4.5" Laminated Dock Bumpers
Model PDF's Description Ships Via Net Weight (lbs)
1012-4.5   10"H x 12"W x 4.5" Projection UPS 33
1014-4.5   10"H x 14"W x 4.5" Projection UPS 38
1018-4.5   10"H x 18"W x 4.5" Projection UPS 48
1024-4.5   10"H x 24"W x 4.5" Projection UPS 63
1030-4.5   10"H x 30"W x 4.5" Projection UPS 79
1036-4.5   10"H x 36"W x 4.5" Projection UPS 94
1096-4.5   10"H x 96"W x 4.5" Projection TRUCK 286
1212-4.5 12"H x 12"W x 4.5" Projection UPS 41
1214-4.5 12"H x 14"W x 4.5" Projection UPS 48
1218-4.5 12"H x 18"W x 4.5" Projection UPS 60
1224-4.5 12"H x 24"W x 4.5" Projection UPS 79
1230-4.5 12"H x 30"W x 4.5" Projection UPS 97
1236-4.5 12"H x 36"W x 4.5" Projection UPS 120
1296-4.5 12"H x 96"W x 4.5" Projection TRUCK 333
624-4.5   6"H x 24"W x 4.5" Projection UPS 42
636-4.5   6"H x 36"W x 4.5" Projection UPS 61
1014-4.5F   10"H x 14"W x 4.5" Projection - Flat one side UPS 38
1214-4.5F   12"H x 14"W x 4.5" Projection - Flat one side UPS 48
V-1120-4.5   20"H x 11"W x 4.5" Projection - Vertical Style UPS 61
V-1124-4.5   24"H x 11"W x 4.5" Projection - Vertical Style UPS 76
V-1130-4.5   30"H x 11"W x 4.5" Projection - Vertical Style TRUCK 92
V-1136-4.5   36"H x 11"W x 4.5" Projection - Vertical Style TRUCK 114
6" Laminated Dock Bumpers
Model PDF's Description Ships Via Net Weight (lbs)
1012-6   10"H x 12"W x 6" Projection UPS 39
1014-6   10"H x 14"W x 6" Projection UPS 45
1018-6   10"H x 18"W x 6" Projection UPS 58
1024-6   10"H x 24"W x 6" Projection UPS 85
1030-6   10"H x 30"W x 6" Projection UPS 98
1036-6   10"H x 36"W x 6" Projection UPS 123
1212-6   12"H x 12"W x 6" Projection UPS 49
1214-6   12"H x 14"W x 6" Projection UPS 56
1218-6   12"H x 18"W x 6" Projection UPS 72
1224-6   12"H x 24"W x 6" Projection UPS 97
1230-6   12"H x 30"W x 6" Projection UPS 121
1236-6   12"H x 36"W x 6" Projection TRUCK 145
1296-6   12"H x 96"W x 6" Projection TRUCK 341
V-1120-6   20"H x 11"W x 6" Projection - Vertical Style UPS 78
V-1124-6   24"H x 11"W x 6" Projection - Vertical Style UPS 96
V-1130-6   30"H x 11"W x 6" Projection - Vertical Style TRUCK 118
V-1136-6   36"H x 11"W x 6" Projection - Vertical Style TRUCK 145
Bumper Installation Hardware
Model   Description Net Weight (lbs)
AS-344   Concrete Anchor Bolt 3/4"x4" (Laminated Bumpers) 1
AS-346   Concrete Anchor Bolt 3/4"x6" (Molded Bumpers) 1
BIT-3/4   Masonry Bit 3/4" 1

back to top ^

WB01372_.gif (406 bytes) Extruded Rubber Bumperm2-series.jpg (6951 bytes)

  • Appropriate for outdoor or indoor protection
  • In-Plant wall protection from forklifts and other material handling vehicles.
  • Applications include Loading Docks, Parking Garages, and Marinas.
  • Contact factory for special lengths.
  • Installs easily
  • Resistant to all types of weather.
  • One piece construction.
  • Anchor bolts are easily installed through existing holes in dock.
Extruded Rubber Bumpers
Model Description Weight (lbs)
M-2-12 2"Wx12"Lx1.75"H Extruded Bumper 2
M-2-18 2"Wx18"Lx1.75"H Extruded Bumper 4
M-2-24 2"Wx24"Lx1.75"H Extruded Bumper 6
M-2-36 2"Wx36"Lx1.75"H Extruded Bumper 8
M-2-120 2"Wx120"Lx1.75"H Extruded Bumper (No Holes) 20
M-4-12 4.25"Wx12"Lx4"H Extruded Bumper 6
M-4-18 4.25"Wx18"Lx4"H Extruded Bumper 8
M-4-24 4.25"Wx24"Lx4"H Extruded Bumper 11
M-4-36 4.25"Wx36"Lx4"H Extruded Bumper 17
M-4-120 4.25"Wx120"Lx4"H Extruded Bumper (No Holes) 60
M-6-12 6"Wx12"Lx6"H Extruded Bumper 11
M-6-18 6"Wx18"Lx6"H Extruded Bumper 16
M-6-24 6"Wx24"Lx6"H Extruded Bumper 20
M-6-36 6"Wx36"Lx6"H Extruded Bumper 31
M-6-120 6"Wx120"Lx6" (No Holes) 110

back to top ^

WB01372_.gif (406 bytes) Specialty Molded Bumpers

l-series.jpg (6647 bytes) t-series.jpg (6780 bytes)

Manufactured from fiber reinforced prime rubber containing nylon and polyester, all models have predrilled, countersunk mounting holes for easy installation, and are drilled to accept 3/4" anchor bolts.  Anchor bolts are easily installed through existing holes in dock.

  • Economical b12134.jpg (6487 bytes)
  • Unique design and construction achieves high impact resistance and long life.
  • Immune to all weather conditions.

 

Specialty Molded Bumpers
Model Description Weight (lbs)
T-22 22"Wx22"Lx3"H T-shaped molded bumper 48
B-1224-3 12"Wx24"Lx3"H Rectangular shaped bumper 38
B-1224-6 12"Wx24"Lx6"H Rectangular shaped bumper 60
B1213-4 12"Wx13"Lx4"H Molded bumper 26
B-1213-4PF 12"Wx13"Lx4"H Plastic Face Molded bumper 32
RF Replacement Face (for 1213-4PF Only) 53
L-1818-4 18"Wx18"Lx4"H L-shaped Molded bumper 42
B-516 5"Wx16"Lx2"H Rectangular shaped bumper 7
B-818 8"Wx18"Lx2"H Rectangular shaped bumper 14
B-516-SF 5"Wx16"Lx2"H Steel Faced Molded bumper 24
B-818-SF 8"Wx18"Lx2"H Steel Faced Molded bumper 44

back to top>

WB01372_.gif (406 bytes) Molded Bumpersdbe-10.jpg (11427 bytes)

These bumpers are excellent for virtually any application.  Whether your use is for high traffic docks or In-plant wall protection, these very rugged bumpers are made to incur excessive friction and abrasion.  Installation is easy -- 3/4" anchor bolts are installed through existing holes in dock.

  • Resistant to abrasion, friction, impact, wear and corrosion.
  • Impervious to weather damage
  • 2-piece construction fully assembled and ready for installation.
Molded Bumpers
Model Description Weight (lbs)
DBE-10-1 4.5"Wx10"Lx3"H 8
DBE-20-1 4.5"Wx20"Lx3"H 19
DBE-30-1 4.5"Wx30"Lx3"H 22

back to top ^

WB01372_.gif (406 bytes) Trailer and Crane Bumperstb10.jpg (6771 bytes)

Manufactured from fiber reinforced prime rubber containing nylon and polyester, all models have predrilled, countersunk mounting holes for easy installation, and are drilled to accept 3/4" anchor bolts.

  • Economical
  • Unique design and construction achieves high impact resistance and long life.
  • Immune to most weather conditions.
Trailer & Crane Bumpers
Model Description Weight (lbs)
TB-10 2.5"Wx6"Lx3.5"H 2
TB-20 3.5"Wx6"Lx3.5"H 4
TB-70 2.25"Wx16"Lx2"H 5
TB-90 5.25"Wx8"Lx3.5"H 6

back to top ^

WB01372_.gif (406 bytes) Bumper Stops


BS-18

Bumper Stops are excellent for protecting vehicles when the parking places are located right next to building walls.

  • Strong, durable, high impact resistant solid rubber bumper.
  • Utilize vertically or horizontally.
  • Optional recessed yellow and black caution stripe.
  • Special lengths available
Extruded Bumper Stops
Model Description Weight (lbs)
BS-12 5.5"Wx12"Hx1.25"H 4
BS-18 5.5"Wx18"Hx1.25"H 5
BS-24 5.5"Wx24"Hx1.25"H 7
BS-36 5.5"Wx36"Hx1.25"H 11

back to top ^

 

Accessories


Anchor Sleeves - 3/4"x4"
AS-344 - 

Anchor Sleeves - 3/4"x6"
AS-346

Masonry Bit - 3/4"
BIT-3/4 

 


Download the product literature for the Dock Bumpers in .pdf format (you need acrobat reader to view .pdfs.  Click below to download Acrobat Reader)

getacro.gif (712 bytes)
 

webmaster@tseq.com
Copyright © 2004 T&S Equipment. 
All rights reserved.  Disclaimer Information

  

Home  |  Ergonomic  |  Loading Dock  |  Material Handling  |  Drum Handling  |  Packaging  |  Storage Solutions  |  Search

Phone (260) 665-7586 • Fax (260) 665-1339 • E-mail: sales@tseq.com